core factor

параметр гистерезиса сердечника
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]

Тематики

• электротехника, основные понятия

EN

• core factor

параметр индуктивности сердечника
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]

Тематики

• электротехника, основные понятия

EN

• core factor

виды коррекции коэффициента мощности
-

There are 2 types of power factor correction: fixed or automatic.
Fixed power factor correction consists of inserting, in parallel on the network, a capacitor bank whose total power is provided by the assembly of capacitors of identical or different ratings. The bank is energized by a contactor that simultaneously supplies all the capacitors (a single step).
The inrush current peak, in the case of fixed correction, can reach 30 times the nominal current of the capacitor bank.
An automatic power factor correction system, on the other hand, consists of several capacitor banks of identical or different ratings (several steps), energized separately according to the value of the power factor to be corrected.
An electronic device automatically determines the power of the steps to be energized and activates the relevant contactors.
The inrush current peak, in the case of automatic correction, depends on the power of the steps already on duty, and can reach 100 times the nominal current of the step to be energized.
[ABB]

PFC Types
There are two types of Power Factor Correction - Passive PFC and Active PFC.
Passive PFC uses passive elements like a ferrite core inductor on the AC input. It is very easy to implement in existing power circuits although the power factor is low at 60-80%. The proper AC input voltage (115V or 230V) must also be chosen manually. In addition, significant EMI can still result with a 115V AC source. Of course, a 230V AC source will not have this problem!.
Active PFC, on the other hand, uses a switching regulator with active elements like an IC, FETs (Field Effect Transistors) and diodes to create an active PFC circuit. This circuit allows the power supply to achieve a power factor of up to 95%, significantly reduce harmonics and automatically adjusts the AC input voltage. This means you do not have to manually select the AC input voltage. It works with all voltages from 110V to 240V.
[ http://www.techarp.com/showarticle.aspx?artno=81&pgno=1]

 

Тематики

• компенсация реактивной мощности

EN

• PFC types
• types of power factor correction

виды коррекции коэффициента мощности
-

There are 2 types of power factor correction: fixed or automatic.
Fixed power factor correction consists of inserting, in parallel on the network, a capacitor bank whose total power is provided by the assembly of capacitors of identical or different ratings. The bank is energized by a contactor that simultaneously supplies all the capacitors (a single step).
The inrush current peak, in the case of fixed correction, can reach 30 times the nominal current of the capacitor bank.
An automatic power factor correction system, on the other hand, consists of several capacitor banks of identical or different ratings (several steps), energized separately according to the value of the power factor to be corrected.
An electronic device automatically determines the power of the steps to be energized and activates the relevant contactors.
The inrush current peak, in the case of automatic correction, depends on the power of the steps already on duty, and can reach 100 times the nominal current of the step to be energized.
[ABB]

PFC Types
There are two types of Power Factor Correction - Passive PFC and Active PFC.
Passive PFC uses passive elements like a ferrite core inductor on the AC input. It is very easy to implement in existing power circuits although the power factor is low at 60-80%. The proper AC input voltage (115V or 230V) must also be chosen manually. In addition, significant EMI can still result with a 115V AC source. Of course, a 230V AC source will not have this problem!.
Active PFC, on the other hand, uses a switching regulator with active elements like an IC, FETs (Field Effect Transistors) and diodes to create an active PFC circuit. This circuit allows the power supply to achieve a power factor of up to 95%, significantly reduce harmonics and automatically adjusts the AC input voltage. This means you do not have to manually select the AC input voltage. It works with all voltages from 110V to 240V.
[ http://www.techarp.com/showarticle.aspx?artno=81&pgno=1]

 

Тематики

• компенсация реактивной мощности

EN

• PFC types
• types of power factor correction

profile log of water injection well — профиль приёмистости нагнетательной скважины

sonic cement bond log — акустическая цементометрия

thermal decay time log — каротаж методом измерения времени термического распада

acoustic transit time log — диаграмма акустического каротажа по скорости

borehole compensated sonic log — диаграмма акустического каротажа с компенсацией влияния скважины

density formation compensated log — диаграмма плотностного гамма-гамма-каротажа с компенсацией влияния скважины

dual spacing neutron log — диаграмма двухзондового нейтронного каротажа

induced spectral gamma-ray log — диаграмма спектроскопического гамма-активационного каротажа; диаграмма спектроскопии наведенного гамма-излучения

nuclear magnetic resonance log — диаграмма ядерно-магнитного каротажа

pulsed neutron capture log — диаграмма импульсного нейтронного каротажа

side-wall epithermal neutron log — диаграмма нейтронного каротажа с прижимным зондом по надтепловым нейтронам

thermal neutron decay-time log — диаграмма импульсного нейтронного каротажа по времени жизни тепловых нейтронов

to run a log — регистрировать каротажную диаграмму

to log a well — проводить каротаж в скважине;

to log in casing — проводить каротаж в обсадной колонне;

to run a log — регистрировать каротажную диаграмму; производить каротаж;

log with API scaling — каротажная диаграмма со шкалой Американского нефтяного института